CAPACITY
UPTO 175TPH
PRESSURE
UPTO 105 KG/CM2
STEAM TEMP
UPTO 525°C
FUEL
RICE HUSK, COAL, LIGNITE, WASHERY, REJECTS, CHAR ETC.
Salient Features
• Bi-drum / Single Drum, Water Tube, Natural circulation top / bottom supported design.
• Better Evaporator Design for better reliability.
• Suitable for saturated and superheater steam. Suitable for Cogeneration and Captive Power Plants.
• Multifuel firing options.
• Underbed / Overbed fuel feed system.
• Bottom Hopper Design for specific applications.
• Optimum combustion with staged Secondary Air System.
a) Traveling Grate (TG)
CAPACITY
Upto 170 TPH
PRESSURE
Upto 110 Kg/cm2 (g)
STEAM TEMP
UPTO 520°C
FUEL
Baggase, Rice Husk, Cotton Stalk, Mustard Stalk, Wood Chips, Paddy Straw, Coal, Lignite etc.
Salient Features
• Continuous Ash Discharge.
• Bi-Drum/Single Drum Design, Natural Circulation, Top Supported Design.
• Tall Furnace for Stagged/Complete Combustion.
• Optimum combustion with staged secondary air system.
• 2 Stage/3Stage Superheater with inters-tage Spray Attemperator.
• Even Fuel Distribution on the Entire Grate.
• Modulating Cyclo motor for Spreader Dampers.
• Grate Driven by Hydraulic Drive/ Mechanical Drive.
b) Dumping Grate (DG)
CAPACITY
UPTO 175 TPH
PRESSURE
UPTO 110 KG/CM2
STEAM TEMP
UPTO 540°C
FUEL
BAGASSE, RICE HUSK ETC.
Salient Features
• Generously sized grate.
• Soot Blowers for on load cleaning of heating surface.
• Secondary air distribution system.
• Pneumatically operated sectionalized dumping grate.
• Two stage superheaters with single stage attemperator for accurate steam temperature control.
c) Pulsating Grate (PG)
CAPACITY
UPTO 50 TPH
PRESSURE
UPTO 67 KG/CM2
FUEL
RICE HUSK, BAGASSE, MUSTARD HUSK, COTTON STALK, OTHER BIO-MASS FUELS AND BREQUETS, ETC.
STEAM TEMP
UPTO 490°C
Salient Features
• Generously sized grate.
• Soot Blowers for on load cleaning of heating surface.
• Secondary air distribution system.
• Hydraulically operated sectionalized pulsating grate.
• Two stage superheaters with single stage attemperator for accurate steam temperature control.
• Continuous Ash discharge.
a) Hypac Boiler
CAPACITY
UPTO 15 TPH
PRESSURE
UPTO 25 KG/CM2
FUEL
RICE HUSK, COAL, PETCOKE, LIGNITE ETC.
Salient Features
• Water cum smoke tube boilers
• Capacity upto 15 TPH
• Easily takes the variation of load fluctuations
• Burn agriculture residue and other high volume low density fuels
• Can be equipped with fluidized bed, moving and stationery grate furnace
• Four side water wall design available
b) Inpac Boiler
Inpac is a packaged, three-pass smoke tube, with fully wet back boiler. Inpac comes in two series for Wood & Biomass and other for Coal. It can also be customized to a completely skid mounted unit on customer demand.
PRODUCT FEATURES
• Three-pass smoke tube with fully wet back boiler.
• Multi-fuel option Wood/Briqutte/Baggase/Coal.
• High efficiency of about 70% to 74%.
• High dryness fraction steam increases usable heat.
• Large water holding capacity.
• Plain Single furnaces for boiler upto 4 TPH capacity.
c) Energypac Boiler
CAPACITY
UPTO 15 TPH
PRESSURE
UPTO 25 KG/CM2
FUEL
WOOD, PLYWOOD WASTE, BAGASSE, COAL, MUSTARD HUSK AND OTHER BIOMASSFUELS.
Salient Features
Similar to Hypac boiler except having equipped with large grate to burn high moisture fuel like
wood chips and other agro wastes
High Efficiency
Paneled water wall furnace and three pass design absorbs maximum heat
Dry Steam
Large water-steam interface area ensures dry steam
Multi-fuel option
Wood, briquettes, coal, agro waste, etc
d) Oil Pac Boiler
CAPACITY
1 TPH - 20 TPH
PRESSURE
10.54 KG/CM2 TO 17.5 KG/CM2
FUEL
Oil, Gas
QUANTITY MANUFACTURED
20 NOS
Salient Features
• Standard design integral furnace boiler suitable for burning heavy and light fuel, oils including gas
• Multipass fire tube design
• Three pass, fully automatic, wetback design
• Designed to give overall efficiency of 88% on NCV
• Dryness fractions to the order of 0.985 achievable
e) Effypac Boiler
CAPACITY
500,1000,1500,2000 Kg/hr
PRESSURE
Upto 17.5 Kg/cm²
STEAM TEMP
Saturated Steam
FUEL
Coal, Wood, Agro Waste, Briquettes etc.
Salient Features
• Plug & Steam Unit need only water, power & Chimney.
• Skid mounted design not requiring any structure, Water tank, insulation, ducting, refractory etc.
• Compact design suitable for industries with less space.
• Inbuilt HRU for high efficiency.
• Cyclone included in package for controlling outlet dust concentration.
